Sanitizers

• Patented TFD (Tube Failure Detection) system protects against chemical spills from a worn out tube and activates an alarm output relay
• Self-Priming against maximum line pressure
• Cannot Vapor Lock or Lose Prime
• Four pump tube material options: Norprene®, Norprene® Chemical, Tygothane®, and FKM
• New and Improved Pump Head provides increased performance and strength.

• Peristaltic pump design does not have valves that can clog.
• Self priming – even against maximum line pressure. By-pass valves are not required. Cannot vapor lock or lose prime.
• Outputs to 4.67 GPH (17.7 LPH).
• Output pressures to 25 PSI (1.7 bar).
• Output volume is not affected by changes in back pressure.
• Patented pump tube design installs easily and stays centered on the rollers without manual adjustment.
• Two pump tubes supplied with each pump. No extra tubing required.

• High Volume Diaphragm Pump
• Acrylic pump head
• 1/2″ ID barbed tubing connections

Capabilities

• Stroke adjustment from 4-100% permits accurate small injections at a high rate per minute.
• 27:1 turndown
• Outputs to 791 GPD.
• Output pressures to 20 PSI.

Construction

enclosure:

• Durable metal epoxy coated construction

Wetted Parts:

• EP diaphragm
• Solid, clear acrylic pump head with large high-output diaphragm.

Motor

• All ball bearing, permanently lubricated gear motor for smooth, quiet, powerful operation.

Shipping Accessories

• Includes 1/2” ID clear PVC suction and discharge tubing, PVC Injection fitting and all mounting hardware.
• PVC suction strainer with removable polypropylene filter screen.

• Economical and versatile.
• All ball bearing, permanently lubricated gear motor for smooth, quiet, powerful operation.
• Turndown Ratio is 27:1
• Stroke adjustment from 4-100% permits accurate small injections at a high rate per minute.
• Double-ball inlet and outlet cartridge type check valves
• Diaphragm material = PTFE

Construction

enclosure:

• Durable metal epoxy coated construction

Wetted Parts:

• PTFE coated EP diaphragm
• Double-ball inlet and outlet cartridge type ceramic check valves.
• Chemical resistant PVDF pump head, valve body and fittings, ceramic balls, FKM static seals and TFE/P ball seat orings. No metal springs are used.

Motor

• All ball bearing, permanently lubricated gear motor for smooth, quiet, powerful operation.

Shipping Accessories

• Includes 3/8” OD suction and discharge tubing, Injection fitting with spring-loaded check valve and all mounting
• PVDF suction (foot) valve with FKM and TFE/P o-rings, ceramic check ball and removable polypropylene filter screen.

Dual Engineered Skid Systems for ProSeries Metering Pumps.
Efficient, Small footprint Design. The pre-fabricated design allows for easy installation, simply drop the Skid System in place and make your connections. Each system is rigorously factory tested. Includes pressure switch option. Easy access to wiring components from the rear of the system.

Joints use Weld-On 724 solvent cement which is chemically resistant to Sodium Hypochlorite and other chemicals.
Dual side inlets enable connection of multiple skids to the same inlet.
The Dual Skid is capable of simultaneous chemical injection of different or like chemical; or one pump can be used as a back-up pump sitting in standby.

Available with the factory options, Custom modifications are not possible.
Optional Flow Verification Sensor for monitoring system: Chemical injection failure stops pump, and triggers an alarm relay to start a back-up pump

Single Engineered Skid Systems for ProSeries® Metering Pumps.

• Efficient, Small footprint Design
• The pre-fabricated design allows for easy installation, simply drop the Skid System in place and make your connections.
• Each system is rigorously factory tested.
• Includes pressure switch option.
• Easy access to wiring components from the rear of the system.
• Joints use Weld-On 724 solvent cement which is chemically resistant to Sodium Hypochlorite and other chemicals.
• Dual side inlets enable connection of multiple skids to the same inlet.
• Available with the factory options, Custom modifications are not possible.

Optional Flow Verification Sensor for monitoring system: Chemical injection failure stops pump, and triggers an alarm relay to start a back-up pump

Easy to read 6 digit LCD, up to 4 decimal position.
Total Reset function can be disabled
Display update time: Rate 1.5 sec., Total 0.5 sec.
Factory calibrated – Nothing to program
NEMA 4X weather resistant enclosure
LCD not recommended for direct sunlight exposure
Standard Models ship with pipe fitting included.

Easy to read 8 digit LCD, up to 4 decimal positions.
Flow rate and Total flow display.
AC/DC transformer or battery operated (RT models only). 4 AA batteries.
Factory programmed with calibration certificate.
Front panel security lockout.
Total reset function can be disabled.
Weather resistant ABS enclosure. NEMA 4X.
Panel mounting option available (ships with 25ft of cable).
Custom calibration units available. Contact the factory.
Standard models ship with pipe fitting.

Note: LCD is not recommended for direct sunlight applications.

• F-300 = Horizontal flow
• D-300 = Vertical down flow
• U-300 = Vertical up flow

• NSF 50 LISTED (1.5″ and 2″ Horizontal flow only)
• Well suited for closed pipe installations
• Easy to read dual scale (GPM / LPM), screen printed on both sides of the meter body
• Acceptable for outdoor installations (direct sunlight okay)
• Pitot Tube (impact tube) design makes it easy to install on existing pipe
• One piece, machined acrylic meter body, annealed for added strength and chemical resistance
• Included SS clamps and gasket seal
• Standard and Low Flow options available
• For use on PVC or Copper Pipes (refer to literature)

• Tough Polysulfone meter body resists high temperatures and pressures
• Compact size for tight installation spaces
• 2” scale length
• In-line or panel mount configurations available (for vertical installation)
• Optional integral flow adjustment valve
• Standard Models: 316 SS guide rod
• K-Series: Hastelloy C guide rod (for corrosive environments)
• Optional: SolarMeter® Brass Adapters

• Polysulfone meter body resists high temperatures and pressures.
• 316 SS, PTFE or Hastelloy rod guided float.
• Direct reading permanent scale.
• Not recommended for direct sunlight.
• Available OEM options: Private labeling, custom calibrations and custom materials.
• In-Line (vertical) mount only.
• Polycarbonate shield available.

Adapter Options:

• 1” and 1-1/2” Inline units.
• 1” M/NPT panel mount units.
• 1” F/NPT and 1” sweat brass units.

For use in UltraPure applications.
No metal in the fluid path.
Rib guided float.
Polysulfone meter body resists high temperatures and pressures.
PTFE float and optional PVC, Polypropylene or PVDF adapters for corrosive applications.
Direct reading permanent scale

Flex-Pro A3 Series Peristaltic Pump for high pressure and high accuracy applications.

• Feed Rates to 33.3 GPH
• Pressures to 125 PSI
• 2500:1 Turndown ratio
• Patented Tube Failure Detection
• Brushless DC Motor
• NEMA 4X (IP 66) Washdown
• 2 Year Warranty
• NEW! Flex-A-Prene® Tubing with more than 4X longer tube life.
• Patented Tube Failure Detection

Flex-Pro A4 Series Peristaltic Pump for high pressure and high accuracy applications.

• Feed Rates to 158.5 GPH
• Pressures to 125 PSI
• 2500:1 Turndown ratio
• Patented Tube Failure Detection
• Brushless DC Motor
• NEMA 4X (IP 66) Washdown
• 2 Year Warranty

Flex-Pro A2 Series Peristaltic Pump for high pressure and high accuracy applications.

• Feed Rates to 17.2 GPH (65.1 LPH)
• Pressures to 125 PSI
• 4-20mA, Pulse Input and Manual Speed Control
• Optional Modbus, Profibus, Industrial Ethernet
• 100:1 Turndown Ratio
• Variable Speed DC Motor
• NEMA 4X (IP 66) Washdown Duty
• 2 Year Warranty
• NEW! Flex-A-Prene® Tubing with more than 4X longer tube life.
• Patented Tube Failure Detection

Micro-Flo for low-flow monitoring applications

Acceptable for Vertical or Horizontal installation

Electronics:

• 9-28 VDC input power required (AC/DC transformers available)
• Factory calibrated – Nothing to program
• Non-Volatile programming and accumulated flow memory
• Total Reset function can be disabled

Tank sizes include:

• 7 gallon
• 15 gallon
• 30 gallon

Features Include:

• Max output 3.96 GPH (15 LPH) A-100N peristaltic pump
• Ships with all necessary accessories.
• The polyethylene tank has extra heavy wall thickness for stability and chemical resistance.
• UV inhibitors for sunlight protection.
• The tank lid can be placed in the open, closed, or vented position.
• Convenient rectangular shape is raised off the floor for easy wash down.

• 3 tank capacities to choose from: 7, 15, and 30 gallons.
• Molded-in threaded inserts and raised shelf for sturdy pump mounting.
• Extra heavy 0.30” thick wall polyethylene with UV inhibitors.
• Ships complete with a C-1100 pump model of your choice.

View all C-1100 pump options here